DAQO GROUP



Homepage >Products & Services >Transformer >Dry-type Distribution Transformer

Dry-type Distribution Transformer
10kV Energy-saving Amorphous Alloy Dry-type Distribution Transformer

Amorphous alloy dry-type transformer not only has the excellent performance of flame-retardant self ...

10kV Energy-saving Amorphous Alloy Dry-type Distribution Transformer

Features:

1. The iron core is made of amorphous alloy as the core material;
2. The no-load loss is reduced by 60-70% compared to the silicon steel core transformer of the same model and capacity, and the energy-saving effect is significant;
3. The coil is made of imported H-grade epoxy resin and poured in a vacuum state (1-3 mbar) with a bright and beautiful surface;
4. High mechanical strength and strong short-circuit resistance; Good moisture resistance;
5. No preheating treatment is required before operation, and intermittent operation does not require dehumidification treatment;
6. Small overall size, light weight, no cracking, no moire on the surface, locally lowered;
7. High insulation level and good lightning shock resistance;
8. Maintenance free, strong heat dissipation ability, and long service life.
9. The transformer has low no-load loss and significant energy-saving effect.



Parameters:

1. Usage conditions: Indoor installation

2. Model: SCBH15, SCBH17, SCBH19

3. Capacity: 30-4000kVA

4. Rated voltage: High voltage/low voltage: 10/0.4kV (customized for non-standard voltage)

5. Impedance: 4-10%

6. Insulation level: F level, H level

7. Connection group: Dyn11

8. Insulation level: LI75AC35/AC3

9. Executive standard: GB 20052-2020 Energy Efficiency Limits and Energy Efficiency Grades for Power Transformers
                                     GB/T 22072-2018 Technical Parameters and Requirements for Dry Type Amorphous Alloy Core Distribution Transformers
                                      GB/T 1094.11-2022 Power Transformers - Part 11: Dry type Transformers

Other products in the same series